Major specifications: Vehicle name/type	UA-Z33
Overall length x width x height (mm)	4625mm x 1840mm x 1295mm
Wheelbase	2650mm
Tread front/rear	1545mm/1545mm
Minimum ground clearance	100mm
Vehicle weight	1465kg
Total passengers	2
Total vehicle weight	1575kg
Engine model	VQ35DE (S1 specs)
Type/cylinder count	DOHC•V6
Cylinder internal diameter and stroke	95.5mm x 81.4mm
Displacement	3.498 liters
Compression ratio	10.3
Maximum output	221kW(300PS)/6400rpm
Maximum torque	363N•m(37.0kgm)/4400rpm
Fuel feed system	Nissan EGI (ECCS)
Fuel/tank volume	Premium unleaded gasoline/80 liters

This vehicle is designed for the use of premium unleaded gasoline. Please always use premium unleaded gasoline. The use of regular unleaded gasoline can result in knocking or other factors which can cause damage to the engine

Engine output figures are net values.

Engine output values can be indicated as net or gross values. Gross values are calculated on the engine itself, while net values are calculated with the engine installed in the vehicle. With the same gasoline engine, the net value will be approximately 15% lower than the gross value (in studies by the Japan Automotive Manufacturers Association Inc.). A note on the SI international units standards concerning engine output and torque: the previously used engine output unit of PS is now expressed as kW (kilowatts), while engine torque, previously described in kgm, is now N•m (Newton-meters) under SI. Previous figures are expressed in SI as follows, with decimal points rounded up: 1PS＝0.7355kW 1kgm＝9.80665N•m

	White Pearl (3P) (#QX1) Special paint color		Diamond Silver (M) (#KY0)		Sparkling Silver (M) (#WV2)
	Super Black (#KH3)		Burning Red (#AX6)		Sunset Orange(PM) <#A17>
	Monterrey Blue (CPM) (#B17)

	(3P) = 3-coat pearl, (M) = metallic, (PM) = pearl metallic, (CPM) = clear pearl metallic
	White Pearl(3P) (#QX1) special paint costs an additional ¥50,000.
*	Product colors shown here may differ slightly from actual paint finish.

Alcantara^® /black Interior color: black (G)

Expert Shops
Nissan Prince Sapporo	P Stage	011-668-3358
Nissan Prince Miyagi	NISMO Sendai Factory	022-277-1990
Nissan Prince Akita	NISMO Paddock Akita	0182-32-5523
Nissan Prince Fukushima	Koriyama Shop	024-945-1968
Nissan Prince Niigata	Distribution Head Office	025-268-2111
Nissan Satio Gumma	NISMO Paddock Gumma	0273-61-1483
Nissan Prince Chiba	NISMO Paddock Chiba	043-244-3701
Nissan Prince Hamamatsu	Factory α	053-465-5162
Nissan Satio Toyama	NISMO Paddock Toyama	076-493-5523
Nissan Prince Hiroshima	Hiroshima Central Shop	082-231-9111
Nissan Satio Okinawa	Headquarters Sales Office	098-877-3018
Sport Shops
Nissan Prince Tochigi	Utsunomiya Shop	028-658-2421
Nissan Prince Ibaraki	Taga Shop	0294-53-4123
Nissan Prince Saitama	Kawaguchi Shino Shop	048-283-9500
Nissan Prince Tokyo	Motor Sports Office	03-3458-8380
Nissan Prince Kanagawa	Higashi-Kanagawa Shop	045-461-2323
Nissan Prince Mie	Suzuka Shop, P's Factory	0593-83-0233
Nissan Satio Hyogo	Nishimiya Shop	0798-35-0321
Nissan Satio Shimane	Unnan Branch Mariposa	0854-45-9255
Nissan Satio Okayama	R-JOY Higashi-Okayama Shop	086-279-1123
Nissan Prince Kagawa	Takamatsu Sales Office	087-881-2106
Nissan Satio Miyazaki	Miyazaki Shop	0985-51-5353

The parts listed here are intended for improved car performance, using a genuine tune-up (engine, brakes, suspension, aerodynamic parts, etc.), Below are some comparisons with standard vehicles.

*1	Compared to standard installations, the use of the reinforced clutch set and lightweight flywheel can result in the need for greatly increased pedal pressure and increased transmission noise. For customers for whom this is not desirable, we suggest the use of a Genuine Nissan clutch set and flywheel.
*2	Aero parts are constructed from FRP and are designed with shape as a priority. Compared to urethane or ABS parts, they are more susceptible to damage from flying stones or other debris.
*3	The 19-inch ultra-wide tires used may cause more difficult handling of the car when encountering rough road surfaces, etc., than normal tires.
*4	The use of sport brake pads will result in loud noises from the brakes, and in an increased amount of dust being released due to wear of the brake pads.
*5	When accelerating to the area of 3,500 to 4,000 rpm, exhaust interference noise-a light metallic resonance or chattering noise may occur in the front tube assembly.
*6	The parts listed include the installation of the large rear spoiler. depending on the required use, when the rear gate is open, the gate may move down greatly.
*7	Because the use of these parts includes the lowering of the car compared to a standard vehicle, be especially carefully about bumps in the road and other irregularities.

---