NISMO 総合パーツカタログ ~ NISMO PARTS CATALOGUE ~

Rear Member Brace [for Skyline GT-R (BCNR33, BNR34)]/リアメンバーブレース

本商品は保証対象外となります。

特長 FEATURES

リヤサスペンションメンバーのサスペンションリンク取付部を連結し、剛性を向上させ、サスペンションメンバーのたわみによるアライメント変化を抑制。サスペンション本来の性能を発揮させることで、コーナリング性能、トラクション性能を向上させます。また、パーツ装着により、車両の挙動変化がドライバーにリニアに伝わり、セッティングを出しやすくなります。

Attached to the suspension link of the rear suspension structure, this brace improves rigidity and limits changes in alignment due to deflection of the suspension. By bringing out the full potential of the suspension, it improves cornering and traction. With the brace installed, the driver is more directly in touch with his car. He can feel and adapt to changes as they come.

仕様 SPECIFICATIONS

  • ・材質:STKM(炭素鋼管)
  • ・パイプ径:φ25.4
  • ・塗装色:シルバー
  • ・曲げ部:補強板により剛性アップ

価格表(単位:円) PRICE LIST(UNIT:YEN)

リヤメンバーブレース車種別適合表

Vehicle Model Part Part no. Code 税込価格 本体価格 Qty per car Part information
Skyline GT-R BCNR33、
BNR34全車
Rear Member
Brace Set
55450-RRR45 E 36,300 33,000 1 1台分セット(フロント側&リヤ側、各左右)、セット販売のみ

※リヤサスペンションメンバーの剛性向上を確実にするため、リヤサスペンションマウントブッシュ(55442-RS580 1台あたり必要数:4 (BCNR33用)(BNR34用))の同時装着をお勧めします。
※オーテックブランドの車両は、記載がない場合適合対象外となります。

Repair Parts(Bolt)

Part Part no. Code 税込価格 本体価格 Qty per car Part information
Bolt-Long、Cam 55226-RRR45 E 1,100 1,000 2 偏心カムボルト
Bolt 01111-01381 2 首下寸法:70mm 日産純正部品
Bolt 55424-33P00 2 首下寸法:83mm
Washer-Plain 08915-4421A 4
Nut W/Washer 01225-00072 2 座付ナット ソケットサイズ:17mm
Nut 08912-9421A 4 座なしナット ソケットサイズ:19mm

商品に関するご注意

  • ●車両の劣化具合によっては、本商品と車両のメンバーの留め点がずれたり、隙間があく恐れがあります。その場合は、メンバーを新品に交換することをお勧めします。ズレが大きいままでの装着や締付トルク不足は、サスペンションリンクやメンバーの破損につながりますのでおやめください。

*COMPETITIONパーツについて

  • ●COMPETITIONパーツはモータースポーツ活動での使用を前提に、過酷な条件下でのパーツ本来の性能を優先して開発しているため、装着により走行中に「音」や「振動」が発生する場合があります。またパーツを正しく装着するための細かなセッティングや技術を必要としますので、商品の特性、車両状態、車両の用途を専門店にご相談の上、専門店でお買い求めください。
  • ●一部のCOMPETITIONパーツは、国が定めている改造にあたるため、構造変更検査等申請が必要な場合があります。構造変更検査等申請に関するお問い合わせは管轄の国土交通省検査登録事務所までお願いします。
  • 注意:商品に添付されている「取付要領書」を必ずお読みいただき、正しく使用してください。また、商品の加工・改造は絶対に行わないでください。
  • 注意:商品の取り付けは、対象車種の「整備要領書」(日産自動車(株)発行)、及び「取付要領書」に従い行ってください。エンジンやブレーキ系などの主要部位の分解整備は、指定整備工場または認証整備工場にて有資格者が作業を行なうか、もしくは取り付け後、指定整備工場または認証整備工場にて有資格者による点検を受けてください。

COMPETITION PARTS

  • 1. COMPETITION PARTS are developed and manufactured for motor sports racing under the strictest standards and prioritize high performance above all else. Depending on where and how they are installed, noise or vibration may occur when driving. Furthermore, for parts to be installed correctly, advanced mechanical skills or fine-tuning is often necessary. Please discuss the particularities of the product you are thinking of purchasing as well as how it fits your car and your specific driving needs with a specialized vendor before you buy and install it.
  • 2. Some COMPETITION PARTS fall under the jurisdiction of national laws and regulations controlling the remodeling, modification or customizing of cars and necessitate an application for permission and/or a special inspection control. Such permissions and inspections must be requested from the Motor Vehicle Bureau of the country of jurisdiction where the car will be modified and/or used. This is the responsibility of the car owner and NISMO will be in no way liable to any person for irregularities in motor vehicle inscription or inspection control for vehicles belonging to buyers or other parties who install COMPETITION PARTS.
  • NOTE: Please always read the installation instructions accompanying NISMO products and follow them faithfully. Please do not re-work, modify or customize NISMO products.
  • NOTE: When installing NISMO products, please do so as indicated in the service manual for the car to be modified (published by NISSAN Motors, Co., Ltd.) as well as in the installation instructions accompanying the part. When overhauling key mechanisms like the engine or brake system, please have the work done by a trained mechanic at a service center listed or certified by NISMO or, at the very least, have your new installation inspected by such a service center to be sure that it is in proper working order.