Features
The Panhard rod helps to avoid deviation of tire position by correcting the leaning to the right of the rear axle beam that can happen during lowdown. The NISMO Panhard rod features a center turnbuckle adjustor, so adjustment is possible without removing the tires. Reinforced rubber bush at both ends increase suspension rigidity, while construction of the rod from special steel has resulted in a 30% increase of strength compared to standard rods.
Specifications
|
： | can be adjusted by +15 to -25 mm, in relation to normal 815mm bar (which can be adjusted by +10 to -60mm) on normal vehicle height. |
|
： | silver body, black turnbuckle |
Application
- 2WD March (K11) all models
- Cube (Z10) all models
- Product is shipped as temporarily assembled; refer to instruction manual for adjustment.
- Be careful in installations with mufflers other than the standard or NISMO Weldina mufflers (discontinued products); these may interfere with the variable Panhard rod.
