[ Pursuit of aerodynamics & cooling performance provides high level of air-flow management ]
Aero parts designed to provide solid cooling for the high-output engine of the NISMO R34 GT-R Z-tune and the high performance braking system, while increasing downforce and improving turning performance during high-speed cornering.
2.Front fender
2.Front fender/エンジンルーム側開口部
（Picture is NISMO R34GT-R Z-tune）
Features
〈Front bumper spoiler〉
A unified bumper spoiler utilizing part of the genuine front spoiler for a design that provides effective air intake for the intercooler/radiator, oil cooler and brakes. To most efficiently collect and guide the flow of air, the exterior around the oil cooler and brake air inlets is an air dam design, while the area around the lower part of the intercooler air inlet is a concave shape. In addition, by creating a lip shape at the front section of the oil cooler outlet and the wheel arch, the air used by the oil cooler and that within the wheel housing is efficiently expelled, increasing brake cooling efficiency and increasing down force.
Material : FRP. Supplied Unpainted
〈Front fender〉
With an opening at the side of the engine compartment, the rear end of the fender has an air outlet design like that used in GT500. This efficiently discharges engine compartment heat and increases engine cooling efficiency while adding to down force (see illustration on previous page). Because each side is extended by 15mm when using the fenders, wider tires (265/35R18) and wheels (18×9.5+5) can be used.
Material : FRP. Supplied Unpainted
Installation
|
: | When installing the front bumper spoiler, drilling and machining of the fender protector, and installation of the GT-R emblem (back) are required. |
|
: | To install the fenders, removal of the front bumper is required. |
Specifications
FRP construction, white gel coated, unpainted
* NISMO R34GT-RZ-tune specialty parts are made of CFRP
Application
Skyline GT-R (BNR34) all models except standard model.
* The front bumper can be installed along with the following parts:
genuine front fender, genuine front diffuser, NISMO air-cooled engine oil cooler (21300-RSRS45), NISMO carbon front under-cover (75880-RRR45).* The front fender can be installed along with the following parts (it cannot be installed along with the NISMO fender cover):
genuine front bumper, NISMO front bumper (62020-RNR45 Dealt by Nissan).
- Installation of the front fender increases the font fender width by 3cm, the total vehicle width is still within the 2cm limitation imposed by Japan’s Ministry of Land, Infrastructure and Transport; no application for remodeling is required.
- Separate fitting items (stays, screws, clips, instruction materials) are not available. When parts are needed for repair or other uses, please purchase the attachment parts set.
- Please be aware that some genuine optional pars cannot be installed along with aero parts.
