A kit including 
355 large diameter disc rotor, Brembo F50 type caliper, and R-tune brake pads (front and rear), with fitting kit. The disc rotor is a one-piece type developed especially for the GT-R and Fairlady Z (Z33), providing the least noise and vibration. The Brembo calipers have been given the special gold coating which is standard for genuine NISSAN calipers. The brake hose (purchased separately) can be a genuine NISSAN or NISMO brake hose kit.
Excellent Durability
Two piece rotors in general are inadequate for the use in longer span due to possible rust on joint area which may cause strength deterioration. Also the heat strength differs between mount-bell joint area and other parts, possibly resulting in cracks. The NISMO high performance brake kit applies optimal strength distribution to one-piece rotor, achieving highly reliable durability.
Superior Strength
A rethinking of material and structure resulted in an enhanced ability to disperse the loads placed on the rotor, and in high strength. The shape and materials uniformly distribute thermal stress, providing two-piece resistance to heat fatigue in a one-piece model. Uniform thermal stress also keeps judder and noise to a minimum.
Stable Performance
By using the exclusive FC cast iron, the effects of heat have been kept to a minimum, providing stable performance. By designing for optimal heat and mechanical strength, the occurrence of judder is lower than that of other companies' two-piece rotors.
Application
- Skyline GT-R (BNR32, BCNR33, BNR34)
- Fairlady Z (Z33) (unit it Jan.07)
- Skyline Coupe (CPV35, until Nov. '04)
above equipped with Brembo calipers.
*Can be fitted on BNR32, Z33 and CPV35 without Brembo calipers; exchange of the rear brakes will be required. For the BNR32, exchange of the master cylinder will also be required.
Kit Contents
- 355 large disc rotor
- Brembo F50 calipers
- R-tune brake pads (front and rear)
- Fitting kit
Compatibility for Genius wheels
| Model | Compatibility | Part information |
|---|---|---|
| Z33, CPV35 | ○ | For 18-inch only |
| BNR32, BCNR33 | × | Fit for 18-inch only |
| BNR34 | × | Even with 18-inch wheels, clearance of caliper outer circumference and wheel rim inner circumference is too tight |
*When the high performance brake kit (40000-RRZ30 and 40000-RRR35) is installed, installation of NISMO LM GT4 18-inch aluminum road wheels is also recommended.
- Because this product includes NISMO R-Tune brake pads, which have been designed primarily for circuit driving, some noise will occur.
- Although the rear pad is for a standard caliper, be sure to use a set of both front and back to ensure front and back brake balance.
- Be sure to conduct a test run before actual driving begins. After extended periods of low-speed/low-temperature driving, or if the vehicle sits for an extended period, the condition of the rotor surface and pad friction surface will change; in this case a test run should also be made.
- These parts are not intended to meet modified car inspections.
- Due to normal deterioration over time, please understand that these parts may show scorching or discoloration.
- Because these are competitive parts, in principle it is difficult to respond to claims after installation.
